SAHKAAR INFRA CONSTRUCTION CHEMICAL

Facebook Twitter Youtube Instagram
Menu

Tile Adhesives

Our Products

Block Joining Mortar
Ready Mix Plaster
Tile Adhesive
Wallputty
Epoxy Grout
SBR Latex

Product Inquiry


Download Broucher

Company Broucher

Sahkaar Tile Adhesives

QUICK 501 (TYPE - 1)

QUICK 502 (TYPE - 1T)

QUICK 503 (TYPE - 2T EN C1TE)

QUICK 511 (TYPE - 3 EN C2TE)

FLEX 630 (TYPE - 4)

Sahkaar Master Fix Adhesive (MFA) 711

SAHKAAR QUICK 511(C2TE)

SAHKAAR QUICK 503(C2T)

SAHKAAR QUICK 501(C1T)

Tile adhesive is essential for ensuring strong and durable bonding of tiles to various surfaces. Sahkaar Infra offers a wide range of high-performance tile adhesives designed to meet diverse installation needs, from residential spaces to commercial projects. These adhesives provide excellent bonding strength, flexibility, and resistance to environmental factors, ensuring long-lasting results.

  • Strong Bonding: Formulated to securely hold ceramic, porcelain, marble, granite, and mosaic tiles.
  • Flexible & Crack-Resistant: Designed to withstand minor structural movement, reducing the risk of cracks.
  • Waterproof & Weather-Resistant: Ideal for both indoor and outdoor applications, including bathrooms, kitchens, and exterior surfaces.
  • Easy Application: Pre-mixed options for smooth and efficient installation, saving time and labor.

QUICK 501 (TYPE - 1)

Quick 501 is a non Skid adhesive is a cementitious polymer modified material in powder form, which only needs on site addition of water to make a paste which is used for fixing tiles over existing mosaic tiles without removing them.

This adhesive is suitable mainly for tiles with apparent porosity greater then 3%

ADVANTAGES : 

  • No need to break or hack the existing tiles.
  • No wetting of surface to be tiled.
  • Holds the tile even at high temperatures.
  • Single component hence easy to use.
  • No Hollow Sound.

PRIMARY USES : 

  • QUICK 501 is mainly used for fixing Ceramic and floor tiles.
  • Ceramic tiles on internal wall and floor.
    Tiles Size –  12×12, 12×18, 12×24

COVERAGE : 

  • Approx 2 – 2.5 Sq.ft. Per Kg.
    for uniform bed thickness of 3mm (T & C apply as per application *)

HOW TO APPLY ?

SURFACE PREPARATION

The substrate must be level, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising.

  • Dry, dusty surfaces should be dampened with water & excess water should be swept off.
  • New concrete slabs shall be damp cured and 28 days old before application which will reduce the shrinkage from tile fixing surface.
  • Expansion joints to be provided & filled with suitable sealant.
  • Do not cover expansion joints with thin set tile adhesive/ tile.
APPLICATION
  • Apply adhesive to the substrate with the flat side of the trowel.
  • Comb on additional adhesive with the notched side.
  • Use the proper sized notched trowel to ensure full bedding of the tile.
  • Tiles must be fixed within 15-20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions.
  • Check the adhesive ribs periodically and if a skin has formed, remove the dried adhesive and apply fresh adhesive.
  • Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back. of each tile and beat in using rubber mallet to imbed tile and adjust level. I
  • Leave no voids behind tiles.
  • Use suitable support along with adhesive for fixing tiles on vertical surfaces.
  • Leave adequate joints between individual wall and floor tiles using spacers. The joint width shall be as per the recommendation of architect/engineer.
  • Clean off surplus adhesive from the tile face and between joints.

PROPERTIES : 

  • Grey dry powder
  • Tested according to IS 15477 : 2019 
  • Packaging: 20 kg / 40 kg bag

SUITABLE SUBSTRATE : 

  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
  • Tile on tile.
TESTING PROPERTIES
AS PER IS 15477 : 2019 REQUIREMENT
TEST RESULT (28 Days)
Tensile Adhesion Strength
(A) Dry Condition
0.5 N/mm²
0.6 N/mm²
Shear Adhesion Strength
(A) Dry Condition
1.0 N/mm²
1.1 N/mm²
Appearance
Grey Powder
Bulk Density
1500 - 1700 kg/m³
Pot Life
Approx 90 Minutes
Open Time
≥ 5 Minute
Slip Resistance
≤ 0.5 mm
Adjustability
≥ 5 Minute
Coverage
Approx-2-2.5 Sq.ft. Per Kg. for uniform bed thickness of 3mm (T & C apply as per application *)
Shelf Life
6 Months
dustra

Sahkaar Tile Adhesive : Great Experience For Building Construction & Renovation

  • Holds the tile even at high temperatures
  • Easy to use
  • No Hollow Sound.
  • Time Effective.
  • No need to break or hack the existing tiles.

QUICK 502 (TYPE - 1T)

SAHKAAR Quick 502 is polymer modified, grey cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles on walls and floor in interior situations. SAHKAAR Quick 502 is cementitious material in the powder form composed of cement, sand, polymer which needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface.

ADVANTAGES :

  • No shrinkage
  • Increase productivity
  • No curing required
  • High water resistant
  • No need for hacking
  • Excellent adhesion to base plaster/concrete surface.

PRIMARY USES : 

  • SAHKAAR Quick 502 is suitable for vitrified and semi vitrified tile and internal floor and wall/external floor.
  • Tile on Tile application.
  • Glass, Mosaic tile, Natural stones, Dense and large dimension tiles.
    (600 x 600 mm, 600 x 1200 mm)

HOW TO APPLY ?

  • Apply adhesive to the substrate with the flat side of the trowel.
  • Comb on additional adhesive with the notched side.
  • Use the proper sized notched trowel to ensure full bedding of the tile.
  • Tiles must be fixed within 15-20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions.
  • Check the adhesive ribs periodically and if a skin has formed, remove the dried adhesive and apply fresh adhesive. 
  • Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile and beat in using rubber mallet to imbed tile and adjust level.
  • Leave no voids behind tiles.
  • Use suitable support along with adhesive for fixing tiles on vertical surfaces.
  • Leave adequate joints between individual wall and floor tiles using spacers. The joint width shall be as per the recommendation of architect/engineer.
  • Clean off surplus adhesive from the tile face and between joints.

PROPERTIES : 

  • Grey dry powder
  • Tested according to IS 15477:2019 – TYPE II
  • Graded Sand, Cement, Selected Fillers, Polymers
  • Packaging: 20 kg / 40 kg bag

SUITABLE SUBSTRATE : 

  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
TESTING PROPERTIES
AS PER IS 15477 : 2019 REQUIREMENT
TEST RESULT (28 Days)
Tensile Adhesion Strength
(A) Dry Condition
0.5 N/mm²
0.75 N/mm²
Shear Adhesion Strength
(A) Dry Condition
1.00 N/mm²
1.1 N/mm²
Appearance
Grey Powder
Bulk Density
1400 - 1600 kg/m³
Pot Life
Approx 90 Minutes
Open Time
≥ 10 Minute
Slip Resistance
≤ 0.5 mm
Adjustability
≥ 10 Minute
Coverage
Approx-2-2.5 Sq.ft. Per Kg. for uniform bed thickness of 3mm (T & C apply as per application *)
Shelf Life
6 Months
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • No shrinkage
  • Increase productivity
  • No curing required
  • High water resistant
  • Excellent adhesion to base plaster/concrete surface

QUICK 503 (TYPE - 2T EN C1TE)

SAHKAAR Quick 503 is polymer modified, grey cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles on walls and floor in interior situations. SAHKAAR Quick 503 is cementitious material in the powder form composed of cement, sand, polymer which needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface.

ADVANTAGES :

  • No shrinkage
  • Increase productivity
  • No curing required
  • High water resistant
  • No need for hacking
  • Excellent adhesion to base plaster/concrete surface

PRIMARY USES : 

  • SAHKAAR Quick 503 is suitable for vitrified and semi vitrified tile, Dense and large dimension tiles and stones (Slabs).
  • This type of adhesive is recommended for both interior floor, wall and for exterior applications.

HOW TO APPLY ?

  • Clean the wall surface by wire brush & potable water
  • Take approx.200-300 ml of clean water for 1 Kg of SAHKAAR Quick 503 in a clean bucket. It is very important to add material into water and not vice versa
  • Stir continuously for 3-5 min. to obtain a homogeneous paste
  • Allow the resultant paste to stand for about 5 min.
  • Re-mix again for about 2 min. The mixture is now ready to apply
  • Apply the material with 6mm notched trowel. spread it evenly
  • Fix the tile and remove excess mixture and clean it with a cloth

PROPERTIES : 

  • Grey dry powder
  • Tested according to IS 15477:2019 – TYPE II
  • Graded Sand, Cement, Selected Fillers, Polymers
  • Packaging: 20 kg / 40 kg bag

SUITABLE SUBSTRATE : 

  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
TESTING PROPERTIES
AS PER IS 15477 : 2019 REQUIREMENT
TEST RESULT (28 Days)
Tensile Adhesion Strength
(A) Dry Condition
(B) Wet Condition
1.0 N/mm²
1.0 N/mm²
1.15 N/mm²
1.15 N/mm²
Shear Adhesion Strength
(A) Dry Condition
(B) Wet Condition
(C) Heat Aging Condition
1.25 N/mm²
1.00 N/mm²
1.00 N/mm²
1.25 N/mm²
1.1 N/mm²
1.1 N/mm²
Appearance
Grey Powder
Bulk Density
1400 - 1600 kg/m³
Pot Life
Approx 120 Minutes
Open Time
≥ 10 Minute
Slip Resistance
≤ 0.5 mm
Adjustability
≥ 10 Minute
Coverage
Approx-2-2.5 Sq.ft. Per Kg. for uniform bed thickness of 3mm (T & C apply as per application *)
Shelf Life
6 Months
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • No shrinkage
  • Increase productivity
  • No curing required
  • High water resistant
  • Excellent adhesion to base plaster/concrete surface

QUICK 511 (TYPE - 3 EN C2TE)

SAHKAAR Quick 511 is high polymer modified, portland Grey cement-based tile adhesive applicable for fixing vitrified/fully vitrified tiles, glass mosaic tiles, all stones, dense and large dimension tiles & slabs. It is mainly suitable for tiles with an apparent porosity less than or equal to 3%.

It is more demanding for wet area, submerged area etc. Tile Adhesive-Quick 511 consists of cement, graded sand and specialized polymers which combine to give high bond strength, water retention, superior work ability, unique properties.

 ADVANTAGES
  • No shrinkage.
  • Increase Productivity.
  • No curing required.
  • High water resistance.
  • No need for hacking
  • Excellent adhesion to base plaster/ concrete surface.
 PRIMARY USAGE
  • SAHKAAR Quick 511 is suitable for interior and exterior floors and wall area. application only.
  • For Internal floor, Wall and external floor, wall like plaster and concrete, Ceramic, Clay tiles, Vitrified, Glass Mosaic, All Natural stones. Tiles Size 1200 x 2400 mm and other large dimension.

HOW TO APPLY ? 

  • Apply adhesive to the substrate with the flat side of the trowel.
  • Comb on additional adhesive with the notched side.
  • Use the proper sized notched trowel to ensure full bedding of the tile.
  • Tiles must be fixed within 15-20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions.
  • Check the adhesive ribs periodically and if a skin has formed, remove the dried adhesive and apply fresh adhesive.
  • Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile and beat in using rubber mallet to imbed tile and adjust level.
  • Leave no voids behind tiles.
  • Use suitable support along with adhesive for fixing tiles on vertical surfaces.
  • Leave adequate joints between individual wall and floor tiles using spacers. The joint width shall be as per the recommendation of architect/engineer.
  • Clean off surplus adhesive from the tile face and between joints.

 

PROPERTIES : 

  • Grey / White in color
  • Tested according to IS 15477:2019 
  • Packaging: 20 kg / 40 kg bag
SUITABLE SUBSTRATE
  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
TESTING PROPERTIES
AS PER IS 15477 : 2019 REQUIREMENT
TEST RESULT (28 Days)
Tensile Adhesion Strength
(A) Dry Condition
(B) Wet Condition
1.5 N/mm²
1.0 N/mm²
1.6 N/mm²
1.25 N/mm²
Shear Adhesion Strength
(A) Dry Condition
(B) Wet Condition
(C) Heat Aging Condition
1.5 N/mm²
1.0 N/mm²
1.0 N/mm²
1.6 N/mm²
1.25 N/mm²
1.25 N/mm²
Appearance
Grey / White Powder
Bulk Density
1400 - 1600 kg/m³
Pot Life
Approx 120 Minutes
Open Time
≥ 30 Minutes
Slip Resistance
≤ 0.5 mm
Adjustability
≥ 30 Minutes
Coverage
Approx-2-2.5 Sq.ft. Per Kg. for uniform bed thickness of 3mm (T & C apply as per application *)
Shelf Life
6 Months
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • No shrinkage.
  • Increase Productivity.
  • No curing required.
  • High water resistance.
  • No need for hacking

FLEX 630 (TYPE - 4)

The highly polymerized, grey-colored Sahkaar Quick 630 is developed with unique qualities like water resistance, slip resistance, flexibility, and extended open time. Additionally, it can be applied to interior, exterior, and wet spaces, it is also suitable for all natural stone tiles as well as ceramic, clay, basalt, vitrified, glass mosaic, and porcelain tiles.

 ADVANTAGES
  • No shrinkage.
  • Increase Productivity.
  • No curing required.
  • High water resistance.
  • No need for hacking
  • Excellent adhesion to base plaster/ concrete surface.
PRIMARY USAGE : 
  • It is suitable for all types of tiles and stones except metal tiles of engineered stones to be installed on dry wall board substrate like gypsum board, Plywood, Wood, Calcium Silicate board, Medium density fibre boards fibre cement board, Bison Panel, etc.
  • Tile Adhesive shall also comply with S1 and S2 Category of transverse deformation.

HOW TO APPPLY ?

  • Apply adhesive to the substrate with the flat side of the trowel.
  • Comb on additional adhesive with the notched side.
  • Use the proper sized notched trowel to ensure full bedding of the tile.
  • Tiles must be fixed within 15-20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions.
  • Check the adhesive ribs periodically and if a skin has formed, remove the dried adhesive and apply fresh adhesive.
  • Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile and beat in using rubber mallet to imbed tile and adjust level.
  • Leave no voids behind tiles.
  • Use suitable support along with adhesive for fixing tiles on vertical surfaces.
  • Leave adequate joints between individual wall and floor tiles using spacers. The joint width shall be as per the recommendation of architect/engineer.
  • Clean off surplus adhesive from the tile face and between joints.

 

PROPERTIES : 

  • Grey Power
  • Tested according to IS 15477:2019 
  • Packaging: 20 kg / 40 kg bag
SUITABLE SUBSTRATE
  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
TESTING PROPERTIES
AS PER IS 15477 : 2019 REQUIREMENT
TEST RESULT (28 Days)
Tensile Adhesion Strength
(A) Dry Condition
(B) Wet Condition
1.5 N/mm²
1.0 N/mm²
1.6 N/mm²
1.1 N/mm²
Shear Adhesion Strength
(A) Dry Condition
(B) Wet Condition
(C) Heat Aging Condition
1.5 N/mm²
1.0 N/mm²
1.0 N/mm²
1.6 N/mm²
1.1 N/mm²
1.1 N/mm²
Appearance
Grey Powder
Bulk Density
1400 - 1600 kg/m³
Pot Life
Approx 120 Minutes
Open Time
≥ 45 Minutes
Slip Resistance
≤ 0.5 mm
Adjustability
≥ 45 Minutes
Coverage
Approx-2-2.5 Sq.ft. Per Kg. for uniform bed thickness of 3mm (T & C apply as per application *)
Shelf Life
6 Months
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • No shrinkage
  • Increase Productivity.
  • No curing required.
  • High water resistance.
  • Excellent adhesion to base plaster/ concrete surface.

Sahkaar Master Fix Adhesive (MFA) 711

SAHKAAR Master-Fix Adhesive complies to Type 5’T S2′ as per “15 15477: 2019-Adhesives for use with ceramic, mesaic and stone tiles-Specification.” SAHKAAR Master-Fix Adhesive is a reaction resin adhesive (R), improved (2) and slip resistant (1) classified as R2T as per EN 12004.

 ADVANTAGES
  • Two components; just mix and use.
  • Long open time suitable for large format & external condition too.
  • Water, freezing, thermal shock resistant.
  • Sustains heat ageing Idea for external & high temperature applications.
  • Highly flexible adhesive sustains heavy vibrations.
  • Chemical resistant & resistance to solvents, alkalis & oils.

WHERE TO USE : 

Sahkaar Master-Fix Adhesive is a two component, Polyurethane Epoxy Hybrid technology based, highly flexible, high-performance, multipurpose, thin-set adhesive for fixing all types of tiles & stones including composites, engineered/ nano stone, metal & glass tiles on interior and exterior floor & wall It is suitable for fixing tiles/ stones over diverse surfaces like cement-based substrate, metal substrates, epoxy/ PU based substrate, drywall boards, Rubber, PVC, plywood, wood derivative and highly deformable & expandable, absorbent & non-absorbent substrates.

PACKAGING :  4kg Bucket

COVERAGE : 

  • 16-20 sq. ft./4 kg pack-1.5 mm bed thickness (using 3 mm x 3 mm notch)
  • 8-10 sq. ft./4 kg pack-3 mm bed thickness (using 6 mm x 6 mm notch).
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • Water, freezing, thermal shock resistant.
  • Easy to use
  • Just mix and use.
  • Highly flexible
  • Chemical resistant

SAHKAAR QUICK 502(C1T)

SAKKAAR Quick 502 is polymer modified, grey cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles on walls and floor in interior situations. SAHKAAR Quick 502 is cementitious material in the powder form composed of cement, sand, polymer which needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface. 

ADVANTAGES
  • No shrinkage.
  • Increase Productivity.
  • No curing required.
  • High water resistance.
  • No need for hacking
  • Excellent adhesion to base plaster/ concrete surface.
SUITABLE SUBSTRATE
  • Cement Plaster.
  • Cement Concrete.
  • Cement Screed.
dustra

Sahkaar Tile Adhasive : Great Experience For Building Construction & Renovation

  • Holds the tile even at high temperatures
  • Easy to use
  • No Hollow Sound.
  • Time Effective.
  • No need to break or hack the existing tiles.